Air Cooled Gas Station Series Cathodic Protection Rectifiers
Low-cost CP rectifiers limited to 1,500 watts of DC output
The “Gas Station Series” air cooled cathodic protection rectifier, is a low-cost rectifier option with the same reliability as the standard air cooled rectifier line. Limited to 1,500 watts of DC output, this smaller rectifier is used for applications such as gas stations, pipelines, storage tanks or other non-hazardous locations where continuous duty, DC power is required.
Standard Features Gas Station Series
- Weatherproof to NEMA 3R
- 16-gauge, White powder coated cabinet with front opening door
- Wall mounting tabs top and bottom (pole mount Channel is optional)
- Heavy-duty transformer with 15% over-design for reserve capacity
- Heavy duty, draw-pull, stainless steel cabinet latch
- Slide-out galvanized chassis
- 20-step voltage control with link bar taps
- Hinged 3/16” Grade XX, Phenolic front panel
- Accessible front panel Total precision shunt
- AC Input circuit breaker
- Magnetic AC Secondary Breakers (instead of fuses)
- Hoyt, separate analog, 2-1/2” round, volt and amp meters
- Time elapsed indicating meter
- Silicon diodes protected by surge suppressors and current limiting breakers
- All electrical connection hardware is Nickel Plated and double-nutted or soldered
- Multi-strand, high temperature insulated flexible wiring
- Terminal block for AC input wires
- Safety shield panel supplied on all units over 65 Volts DC
